<b>Two</b> Turquoise Artbead Blind Pulls [ BP006 ] - Blind Pulls

Home > Blind Pulls > Two Turquoise Artbead Blind Pulls

Two Turquoise Artbead Blind Pulls
[BP006]

$23.99

<b>Two</b> Turquoise Artbead Blind Pulls

Click to enlarge

Dress up your beautiful blinds or shades with a pair of our eye-catching and utterly unique blind pulls! Replace your existing blind's lackluster, factory-supplied cord ends with a fresh new design sure to get noticed. A neutral wooden bead nestles inside a beautifully detailed antiqued leave resting onan art bead pattern of turquoise and natural hues; antiqued golden accents. Made of wood and lampwork glass on sturdy thick gauge brass (shown) wire. See inset photo for closeup of design. (Only available in goldtone; not available as shade pulls)

You will receive two blind pulls--$22.99/pair

Blind Pull Instructions Push the existing cord on your blind/s through the exisiting end (needle-nose pliers can be used to help grab and pull out the knot). Unknot or cut the cord and remove the end bead that came with your blind or shade. Then thread the cord through the top of the coiled connector on your Trace Ellements Blind Pull and knot at the bottom. While holding the entire coil connector piece between your fingers with one hand (this will prevent the coil from expanding) pull the cord up and into the coil connector with the other hand until the knot is hidden from view.
Depending on the thickness of your cord, knot the cord one or as many times as necessary to keep it from slipping through the top of the coil connector. Very thin cords can share one Trace Ellements Blind Pull; most cords will require one pull for each cord.
To accentuate the visibility of your new Trace Ellements Blind Pulls consider shortening the blind/shade cord length so your pulls rest at eye level; before shortening your cords let blinds down completely to test necessary cord length in both up and down positions.
Note: most blind pull cords are thinner than 2mm; however knotted ends of blind pull cords thicker than 2mm will not hide from view inside connector; for these thicker cords first thread the cord through the coiled connector then use a dab of hot glue on the ends of the cord to prevent fraying and to create a thicker end. Wait until glue is completely hardened, then pull cord up and into coil connector as described above.
Child Safety

This product was added to our catalog on Saturday 20 March, 2010.

Customers who bought this product also purchased

Cluster Luster — Green Grape Earrings	Amber-Olive Beauty Bottle Stopper	The Duke & Duchess of Amber--Blind Pull Pair
Fan Dance Zipper Pull	A Brilliant Egyptian Sky Earrings	1 Clean Sweep of Prairie Wheat II--Light / Fan Pull